DC Econo Series - System Features

1 High pressure pump, Reinforced Duplex stainless steel with permanent magnet electric motor, completely assembled 1 40" Pressure vessel with reverse osmosis membrane, completely assembled with: 1 Automatic pressure regulator valve 1 High pressure gauge 1 Product flow meter

1 Filter housing, completely assembled with 1 hose barb outlet (1/2" with boost pump or 5/8" without boost pump) 1 Bracket with 8 screws 1 20micron pre-filter cartridge 1 Intake 3-way valve with 2 hose barb fittings (Service: 5/8”, Intake: 1/2”)

1 Diverter (3 way) valve with 3/8" compression fittings and bracket 30 feet PVC tubing for product and reject water with fittings 10 feet wire coil reinforced intake hose (without boost pump only) 2 feet wire coil reinforced intake hose, 5/8" (with boost pump) or 10 feet braided hose 1/2" (with boost pump) 1 set of 316SS hose clamps

1 Installation and operating manual

Hose Connections
High pressure pump intake ( without boost pump)	5/8"   /   16mm
Boost pump intake	5/8"   /   16mm
Brine reject PVC tubing	3/8"   /   10mm
Product water PVC tubing	3/8"   /   10mm

Back to DC Watermakers