Specifications, System Features and Prices:

(1) For installations where space is limited, the high-pressure pump and the flow/electrical control unit of the semi modular system can be ordered in separate modules at no extra charge.

(2) For installations where space is limited, the high-pressure pump, the flow/electrical control unit, the pressure vessel rack and the pre-filters of the continuous duty, framed vertical mount system can be ordered in separate modules at no extra charge.    Modules Dimensions    

(3) Not upgradeable.

PRO Semi-Modular Systems with compact 21” membrane racks

Reverse Osmosis performance varies with the feed water temperature and salinity. The rated performance is tested at 26°C / 80°F water temperature and a salinity of 35000 ppm TDS.

Prices shown do not include shipping, taxes and/or customs duties (if applicable).

Frequently asked Questions

Options and Accessories

Semi Modular Bulkhead Mount System 1200–PRO–3    (with optional seawater supply pump)   Vertical Mount System 1500–PRO–4 (2012 model)

	Self contained or semi modular concept for space saving, fast and easy self installation
	All control systems are electro-mechanical – No electronic circuits close to seawater
	Spring loaded automatic Duplex stainless steel pressure regulator – No leaking needle valves
	Extremely silent operation – no charge/discharge noise
	High pressure hoses with O-ring sealed Duplex stainless steel fittings – No corroding or cracking compression fittings
	RO pressure vessels with O-ring sealed Duplex stainless steel high pressure fittings  -  No cracking NPT end plugs
	Corrosion resistant marine aluminum frame, epoxy primed and polyurethane top coated
	Widely available commercial size sediment pre-filters (10”x 4.5”, Big Blue) are standard equipment
	Custom system configuration for tight installations at no extra charge
	Five years limited warranty on the Duplex stainless steel high pressure pump
	Post treatment pH buffer / hardener element saves up to 50% product water.    Read more...
	Product water from any RO watermaker is extremely pure, has little salt content, is very soft and acidic due to the removal of alkaline mineral constituents of the seawater. Therefore, similar to rainwater, using RO product requires significantly more freshwater to rinse off soap, shampoo and other detergents. ECHOTec is the first watermaker manufacturer to combat this problem by improving the RO product quality with a standard supplied post treatment system. The newly developed mineral dispenser returns some hardness to the water and offers a practical, low maintenance solution that saves up to 50% fresh water. The ECHOTec post treatment element also contains a mixture of minerals that returns bicarbonate alkalinity, correcting pH only enough to reach a neutral equilibrium. This dramatically reduces corrosion on metal tanks, boilers, washing machines and plumbing due to acidic product water. As the water is slightly re-mineralized, this will also improve the taste of the product water.
	No proprietary equipment  -  Consumables may be obtained anywhere (except pH buffer element)
	Top notch support and after sales care!