ECHO Tec. Watermaker

Options and Accessories - Beach House On-shore Series Desalination Systems

 


Semi Automatic Fresh Water Flush - US$ 365 (ECHOTec recommended)

The semi automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. Avoids timing and forgetting the manual valve in flush mode.





Product Diverter / TDS Monitor -  US$ 485 (ECHOTec recommended)

The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the boats freshwater tank.

A user adjustable delay ensures high quality freshwater, free from any odors independent from the TDS value. The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual testing and tank filling with the standard 3-way valve on the control panel).




Seawater Supply Pump
- US$ 685
(all systems except 400-BHL-1, 700-BHL-2, 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 30ft/9m above sea or well water level (please view the installation layout). In connection with the optional reservoir, the feed pump can prime up to 9ft / 2,7m. Multiple pumps can be used in-line for higher lift or long vertical intake lines.
Available for all power options.




Seawater Supply Pump - US$ 365

(all systems except 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 10ft/3m above feed water level. In connection with the optional reservoir the feed pump primes up to 7ft / 2,1m. Multiple pumps can be used in-line for higher lift or long vertical intake lines. Available in 115/230V AC, 50/60Hz, single phase only.




Submersible Seawater Supply Pump - US$ 420
(systems 400-BHL-1 and 700-BHL-2 only)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 7ft / 2,1m without the need for a priming reservoir. Multiple pumps can be used in-line for higher lift or long vertical intake lines. This pump is water cooled and can be installed above water. Available in 115/230V AC, 50/60Hz, single phase only.



Priming Reservoir
- US$ 95

In connection with the seawater feed pump, the reservoir allows suction
up to 9ft / 2,7m.


 

Maintenance Kit - US$ 265

10 Pre-filters, 5 and/or 20 micron (4 ½” x 10”)
  2 Active carbon filters (fresh water flush)
  1 Ltr. High-pressure pump oil


  Extended Maintenance Kit - US$ 85 

  1 Acid cleaning compound (11.5 oz – 330 g)
  1 Alkaline cleaning compound (11.5 oz – 330 g)
  2 Storage compounds, Biocide (11.5 oz – 330 g)
  1 Complete spare seal and O ring kit (except high pressure pump)


 
Consumables     US$
       
BB 5 micron pre-filter cartridge   23.50
BB 20 micron pre-filter cartridge   23.50
Active carbon cartridge   19.00
pH neutralizer / mineral cartridge   68.50
Sea strainer screen   21.00
High flow membrane element 40” 399.00
Biocide / Storage compound     9.90
Alkaline cleaner   14.90
Acid cleaner   14.90
High Pressure Pump valve kit 135.00
High Pressure pump seal kit (Water and Oil) – Modular 165.00
High Pressure pump seal kit (Water and Oil) – Vertical 225.00
   


 
Order by phone or e-mail.     Wire transfer or Visa/MasterCard accepted.
parts@echo-marine.com
    Tel: + 868 634 20 27

 


Back to Beach House On-shore Desalination / Land Based Series