ECHO Tec. Watermaker

Options and Accessories - Pro Series Desalination Systems

 
 

Semi-Automatic Fresh Water Flush - 282

The semi-automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. This feature eliminates manual timing and forgetting to close the fresh water flush valve after the manual flush cycle.


 

Product Diverter / TDS Monitor -  348

The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the freshwater storage tank.

The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual sampling and tank filling).





Seawater Supply Pump 490
(drip proof - recommended for Systems PRO-900 -
PRO-1800)

The optional centrifugal seawater supply pump is needed where onboard pressurized seawater (20-50 psi) is not available. The powerful magnetic drive, seal-less and corrosion resistant pump is installed below the water line. 

It provides up to 30 PSI feed pressure for cost efficient operation of the standard supplied 5 and 20 micron cartridge pre-filtration system. Available for all power options. 
For complete redundancy, systems 2600 and 3600 require 2 pumps.
  




Boost pump
- ₤ 260 (drip proof - recommended for Systems PRO-500 - PRO-780)

If the high pressure pump is installed less than 2 feet below the waterline, the installation of an optional boost pump is recommended.

3/4" intake hose barb, 5.8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose.






Boost pump - 248
(submersible - recommended for Systems PRO-500 - 780)

If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.

1 Magnetic (no seal/no leak - ceramic shaft) submersible Boost Pump, 3/4" intake hose barb, 5/8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose.



 


Maintenance Kit - ₤ 190


10 Pre-filters, 5 and/or 20 micron (4 ½” x 10”)
  2 Active carbon filters (fresh water flush)
  1 Ltr. High-pressure pump oil



 
Extended Maintenance Kit - ₤
62

  1 Acid cleaning compound (11.5 oz – 330 g)
  1 Alkaline cleaning compound (11.5 oz – 330 g)
  2 Storage compounds Biocide (11.5 oz – 330 g)
  1 Complete spare seal and O ring kit (except high pressure pump)


 
Consumables        
   
BB 5 micron pre-filter cartridge   14.60
BB 20 micron pre-filter cartridge   14.60
Active carbon cartridge   11.80
pH neutralizer / mineral cartridge   42.70
Sea strainer screen   13.10
Membrane element 21" ECHOTec SW-2521-HR (High Rejection) 136.00
Membrane element 40" ECHOTec SW-2540 (Standard SW-RO Element) 181.00
Biocide / Storage compound     6.20
Alkaline cleaner     9.30
Acid cleaner     9.30
High Pressure Pump valve kit   84.10
High Pressure pump seal kit (Water and Oil) – Modular 102.80
High Pressure pump seal kit (Water and Oil) – Vertical 140.20
   

 
Order by phone or e-mail.     Wire transfer or Visa/MasterCard accepted.
parts@echo-marine.com     Tel: + 868 634 20 27
 


Back to RO Seawater Desalination Systems for Superyachts and Commercial Vessels