ECHO Tec. Watermaker

Options and Accessories - Beach House On-shore Series Desalination Systems

 


Semi Automatic Fresh Water Flush - ₤ 285 (ECHOTec recommended)

The semi automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. Avoids timing and forgetting the manual valve in flush mode.





Automatic Fresh Water Flush - ₤ 310

The fresh water flush is automatically performed after every use of the desalination system at a factory set and user adjustable flush duration. The automatic flush timer can also be activated at the touch of a button to extend the membrane storage time without running the desalination system. 





Product Diverter / TDS Monitor - ₤ 378
(ECHOTec recommended)

The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the boats freshwater tank.

A user adjustable delay ensures high quality freshwater, free from any odors independent from the TDS value. The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual testing and tank filling with the additional 3-way valve).






Seawater Supply Pump
- 530
(all systems except 400-BHL-1, 700-BHL-2, 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 30ft/9m above sea or well water level (please view the installation layout). In connection with the optional reservoir, the feed pump can prime up to 9ft / 2,7m. Multiple pumps can be used in-line for higher lift or long vertical intake lines.
Available for all power options.




Seawater Supply Pump - 285

(all systems except 5000-BHL-3, 10K-DUAL-8)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 10ft/3m above feed water level. In connection with the optional reservoir the feed pump primes up to 7ft / 2,1m. Multiple pumps can be used in-line for higher lift or long vertical intake lines. Available in 115/230V AC, 50/60Hz, single phase only.




Submersible Seawater Supply Pump - 310

(systems 400-BHL-1 and 700-BHL-2 only)

The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 7ft / 2,1m without the need for a priming reservoir. Multiple pumps can be used in-line for higher lift or long vertical intake lines. This pump is water cooled and can be installed above water. Available in 115/230V AC, 50/60Hz, single phase only.



Priming Reservoir
- ₤ 78

In connection with the seawater feed pump, the reservoir allows suction
up to 9ft / 2,7m.

 


Maintenance Kit - ₤ 208

10 Pre-filters, 5 and/or 20 micron (4 ½” x 10”)
  2 Active carbon filters (fresh water flush)
  1 Ltr. High-pressure pump oil


 


Extended Maintenance Kit - ₤
68

  1 Acid cleaning compound (11.5 oz – 330 g)
  1 Alkaline cleaning compound (11.5 oz – 330 g)
  2 Storage compounds, Biocide (11.5 oz – 330 g)
  1 Complete spare seal and O ring kit (except high pressure pump)



 
Consumables        
   
BB 5 micron pre-filter cartridge   14.60
BB 20 micron pre-filter cartridge   14.60
Active carbon cartridge   11.80
pH neutralizer / mineral cartridge   42.70
Sea strainer screen   13.10
High flow membrane element 40” 248.50
Biocide / Storage compound     6.20
Alkaline cleaner     9.30
Acid cleaner     9.30
High Pressure Pump valve kit   84.10
High Pressure pump seal kit (Water and Oil) – Modular 102.80
High Pressure pump seal kit (Water and Oil) – Vertical 140.20
   

 
Order by phone or e-mail.     Wire transfer or Visa/MasterCard accepted.
parts@echo-marine.com     Tel: + 868 634 20 27
 


Back to Beach House On-shore Desalination / Land Based Series