Options and Accessories - AC Series

	Boost pump - ₤ 260 3/4" intake hose barb, 5.8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.
	Fresh water flush kit - ₤ 90 The fresh water flush kit enables you to store your watermaker for up to 10 days without the use of chemicals (biocide). The fresh water flush storage can be repeated every 10 days. 1 Filter housing, 1 active carbon cartridge, 316 SS bracket, 8 screws, shut off valve, 2 hose barb connectors, Nylon tee, 10 ft braided hose, 316SS hose clamps
	Low pressure gauge - ₤ 60 The low pressure gauge indicates when the pre-filters have to be changed.
	5 Micron Pre-filter housing - Free of charge The additional 5 micron pre-filter is only recommended in connection with the optional boost pump. 1 Filter housing, 1 pre-filter cartridge, 1 bracket, 1 3/4" NPT nipple
	Maintenance Kit - ₤ 105 10 Pre-filters, 5 and/or 20 micron (2 ½” x 10”)   1 Spare sea strainer screen   2 Active carbon filters (fresh water flush)   1 Ltr. High-pressure pump oil
	Extended Maintenance Kit - ₤ 60   1 Acid cleaning compound   1 Alkaline cleaning compound   2 Storage compounds (Biocide)   1 Complete spare seal and O ring kit (except high pressure pump)
	Consumables         ₤     5 micron pre-filter cartridge     6.20 20 micron pre-filter cartridge     6.20 Active carbon cartridge   11.80 pH neutralizer / mineral cartridge   42.70 Sea strainer screen   13.10 High flow membrane element 40” 248.50 Biocide / Storage compound     6.20 Alkaline cleaner     9.30 Acid cleaner     9.30 High Pressure Pump valve kit   84.10 High Pressure pump seal kit (Water and Oil) 102.80
	Order by phone or e-mail.     Wire transfer or Visa/MasterCard accepted. parts@echo-marine.com     Tel: + 868 634 20 27

Back to AC Watermakers