ECHO Tec. Watermaker


Standard System Features - Belt Driven

1 Filter housing 20 microns completely assembled ( w/o boost pump ) or
2 filter housings 5 and 20 microns ( with optional boost pump )
1 316 Bracket with screws.
1 5/8" Service valve with 1 nylon nipple and 2 barbed hose connectors (with boost pump) or
1 3/4" flush/storage valve with 1 Nylon nipple and 3 barbed hose connectors (without boost pump)

1 High pressure pump with 316 SS pump head and magnetic clutch

 
Pressure vessel(s) with reverse osmosis membrane(s)
  500-AML-1 one 40" vessel  
  900-AML-2 two   40" vessels  
1200-AML-3 three   40" vessels  
1500-AML-4 four   40" vessels  
   


1 316 Stainless steel control panel completely assembled with
1 Duplex stainless steel self regulating pressure control valve
1 High pressure gauge
1 Product flow meter
1 Diverter (3-way) valve
1 Breaker or
2 Breakers with optional boost pump


 
15 feet / 4.5 meter high pressure hose with 2 x 316 high pressure fittings attached
2 x 316 field attachable high pressure fittings
 
20 feet / 6 meter 3/8" blue product water tubing or 1/2" braided hose (model 1500)
10 feet/3 meter 3/4" wire coil reinforced intake hose (without boost pump only)
10 feet/3 meter 5/8" braided hose + 3 feet wire coil reinforced intake hose ( with boost pump)
10 feet/3 meter 1/2" braided reject hose

 
2 x 1/2" 316 hose clamps (model 500, 900, 1200) or
6 x 1/2" 316 hose clamps (model 1500)
6 x 3/4" and 2 x 5/8" 316 hose clamps (with boost pump) or
8 x 3/4" 316 hose clamps (without boost pump)
 
1 Handheld TDS Meter
2 Filter cartridges, 20 microns (without boost pump) or 5 and 20 microns (with boost pump)

1 Biocide, 1 acid cleaning solution, 1 alkaline cleaning solution

1 complete Installation and Operating Manual



Back to Belt Driven Watermakers