ECHO Tec. Watermaker


Options and Accessories - Pro Series Desalination Systems

 


Seawater Supply Pump AU$ 890
(drip proof - recommended for Systems PRO-1200 – 1500)

The optional centrifugal seawater supply pump is needed where onboard pressurized seawater (20-50 psi) is not available.  The powerful magnetic drive, seal-less and corrosion resistant pump is installed below the water line. 

It provides up to 30 PSI feed pressure pressure for cost efficient operation of the standard supplied 5 and 20 micron cartridge pre-filtration system. 
Available for all power options. For complete redundancy, system 3500 requires 2 pumps.
  




Boost pump
- AU$ 475 (for dry locations - recommended for Systems PRO-500 - 780)

If the high pressure pump is installed less than 2 feet below the waterline, the installation of an optional boost pump is recommended.

3/4" intake hose barb, 5.8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose.





Boost pump -
AU$ 450
(submersible - recommended for Systems PRO-500 - 780)

If the high pressure pump is installed less than 2 feet below the waterline or an additional 5 micron pre-filter is added, the installation of an optional boost pump is recommended.

1 Magnetic (no seal/no leak - ceramic shaft) submersible Boost Pump, 3/4" intake hose barb, 5/8" outlet hose barb, 4 feet / 1.2 meter 3/4" wire reinforced intake hose, 10 feet / 3 meter 5/8" braided feed hose.



 


Automatic Fresh Water Flush -
AU$ 515

The automatic fresh water flush is performed after every use of the desalination system at a factory set and user adjustable flush duration. The automatic flush timer can also be activated at the touch of a button to extend the membrane storage time for 10 days without running the desalination system. 


 


Product Diverter / TDS Monitor
- AU$ 630

The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the vessels freshwater tank.

A user adjustable delay ensures high quality freshwater, free from any odors independent from the TDS value. The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual testing and tank filling with the standard 3-way valve on the control panel).



 


Maintenance Kit - AU$ 345


10 Pre-filters, 5 and/or 20 micron (4 ½” x 10”)
  2 Active carbon filters (fresh water flush)
  1 Ltr. High-pressure pump oil



 
Extended Maintenance Kit -
AU$ 110

  1 Acid cleaning compound (11.5 oz – 330 g)
  1 Alkaline cleaning compound (11.5 oz – 330 g)
  2 Storage compounds Biocide (11.5 oz – 330 g)
  1 Complete spare seal and O ring kit (except high pressure pump)


 
Consumables      AU$
   
BB 5 micron pre-filter cartridge   14.60
BB 20 micron pre-filter cartridge   14.60
Active carbon cartridge   11.80
pH neutralizer / mineral cartridge   42.70
Sea strainer screen   13.10
High flow membrane element 21” 136.00
High flow membrane element 40” 181.00
Biocide / Storage compound     6.20
Alkaline cleaner     9.30
Acid cleaner     9.30
High Pressure Pump valve kit   84.10
High Pressure pump seal kit (Water and Oil) – Modular 102.80
High Pressure pump seal kit (Water and Oil) – Vertical 140.20
   

 
Order by phone or e-mail.     Wire transfer or Visa/MasterCard accepted.
parts@echo-marine.com     Tel: + 868 634 20 27
 


Back to RO Seawater Desalination Systems for Yachts and Superyachts