| |
|
Semi-Automatic Fresh Water Flush - AU$ 550 (ECHOTec recommended)
The semi-automatic fresh water flush is activated at the touch of a button at a factory set and user adjustable flush duration. This feature eliminates manual timing and forgetting to close the fresh water flush valve after the manual flush cycle.
|
|
|
Automatic Fresh Water Flush - AU$ 598
The fresh water flush is automatically performed after every use of the desalination system at a factory set and user adjustable flush duration. The automatic flush timer can also be activated at the touch of a button to extend the membrane storage time without running the desalination system.
|
|
|
Product Diverter / TDS Monitor - AU$ 730 (ECHOTec recommended)
The automatic product diverter / TDS monitor constantly displays the product salinity on the LCD screen. On start-up, once the product water meets the factory set and user adjustable quality level, the product is diverted to the freshwater storage tank.
The failsafe (never allows unsafe product to enter tank) diverter valve has a manual override option (allows manual sampling and tank filling).
|
|
|
Seawater Supply Pump - AU$ 1030
(all systems except 400-BHL-1, 700-BHL-2, 5000-BHL-3, 10K-DUAL-8)
The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 30ft/9m above sea or well water level (please view the installation layout). In connection with the optional reservoir, the feed pump can prime up to 9ft / 2,7m. Multiple pumps can be used in-line for higher lift or long vertical intake lines.
Available for all power options. |
|
 |
Seawater Supply Pump - AU$ 550
(all systems except 5000-BHL-3, 10K-DUAL-8)
The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 10ft/3m above feed water level. In connection with the optional reservoir the feed pump primes up to 7ft / 2,1m. Multiple pumps can be used in-line for higher lift or long vertical intake lines.
Available in 115/230V AC, 50/60Hz, single phase only. |
|
 |
Submersible Seawater Supply Pump - AU$ 635
(systems 400-BHL-1 and 700-BHL-2 only)
The optional centrifugal pump supplies feed water to the desalination system at a total height of up to 7ft / 2,1m without the need for a priming reservoir. Multiple pumps can be used in-line for higher lift or long vertical intake lines. This pump is water cooled and can be installed above water.
Available in 115/230V AC, 50/60Hz, single phase only. |
|
 |
Priming Reservoir - AU$ 145
In connection with the
seawater feed pump,
the reservoir allows suction
up to
9ft / 2,7m. |
|
| |
Maintenance Kit - AU$ 398
10 Pre-filters, 5 and/or 20 micron (4 ½” x 10”)
2 Active carbon filters (fresh water flush)
1 Ltr. High-pressure pump oil
|
|
| |
Extended Maintenance Kit - AU$ 130
1 Acid cleaning compound (11.5 oz – 330 g)
1 Alkaline cleaning compound (11.5 oz – 330 g)
2 Storage compounds, Biocide (11.5 oz – 330 g)
1 Complete spare seal and O ring kit (except high pressure pump)
|
|
| |
| Consumables |
AU$ |
| |
|
| BB 5 micron pre-filter cartridge |
30.00 |
| BB 20 micron pre-filter cartridge |
30.00 |
| Active carbon cartridge |
24.00 |
| pH neutralizer / mineral cartridge |
85.00 |
| Sea strainer screen |
26.00 |
| High flow membrane element 40" |
375.00 |
| Biocide / Storage compound |
12.50 |
| Alkaline cleaner |
18.50 |
| Acid cleaner |
18.50 |
| High Pressure Pump valve kit |
170.00 |
| High Pressure pump seal kit (Water and Oil) – Modular |
205.00 |
| High Pressure pump seal kit (Water and Oil) – Vertical |
280.00 |
| |
|
|
|
| |
Order by phone or e-mail. Wire transfer or Visa/MasterCard accepted.
parts@echo-marine.com Tel: + 868 634 20 27
|
| |
